Natural gas
Continuous and peaking operation for industrial parks, distributed generation, standby power and CHP/CCHP.
Gas engine generator sets
Gas engine generator sets
& combined heat and power
Generator sets and auxiliary systems are configured around fuel composition, load profile, grid conditions, heat demand and environmental constraints.
Send fuel and load dataFuel-led selection
Confirm fuel quality
Then define the unit and systems
Selection considers composition, heating-value variation, impurities, ambient temperature, altitude, operating hours and heat demand alongside rated output. Parameters require gas analysis and project verification.
Biogas & landfill gas
Define cleaning, pressure regulation and engine suitability from composition, moisture, sulphur compounds and heating value.
Coalbed methane & associated gas
Coordinate gas treatment, control strategies and generator packages for variable heating values and impurities.
Special gases
Fuel analysis, suitability screening and technical assessment for coke-oven gas, syngas and other special fuels.
Published model references
Model families &
project specification matching
Published model families support preliminary selection. Brand names and parameters do not imply authorization, stock or a supply commitment.
| Brand | Series | Typical model families | Reference application |
|---|---|---|---|
| INNIO Jenbacher | Type 3 | J312 / J316 / J320 | Small / medium distributed energy, biogas & industrial gases |
| INNIO Jenbacher | Type 4 | J412 / J416 / J420 | Medium-scale generation, CHP & industrial parks |
| INNIO Jenbacher | Type 6 | J612 / J616 / J620 / J624 | Large-scale CHP & industrial energy centres |
| MWM | TCG 2020 | V12 / V16 / V20 | Approx. 1–2 MW class; verify fuel and version |
| MWM | TCG 2032 | V12 / V16 / 2032B V16 | 50 Hz：3,333 / 4,300 / 4,500 kWel |
MWM TCG 2032 · Natural gas · 50 Hz reference3,333–4,500 kWel
Published electrical efficiency: approx. 43.9%–44.6%. Output and efficiency depend on fuel, emissions configuration, frequency, altitude and ambient conditions.
Package scope
From one unit to an energy centre
Unified system scope and interfaces
01Gas engine & alternator02Gas treatment, regulation & metering03Controls, grid connection & distribution04Heat recovery & CHP/CCHP05Container / acoustic enclosure & ventilation06Installation, commissioning & operation support
Continuous generation
For stable fuel supply and high annual operating hours, with emphasis on efficiency, availability and maintenance planning.
Combined heat and power
Recover jacket-water and exhaust heat for steam, hot water, cooling or process heat.
Peaking & standby
Assess rapid starts, grid controls, black-start capability and multi-unit operation as project-specific options.
Project information
Share gas analysis and load profiles
Include location, ambient conditions, grid voltage, operating mode, heat demand and delivery schedule.